Full platform demo
Full PixinnTech ecosystem overview: OEE, energy, TPM, logistics, quality, safety and production screens in one context.
Manufacturing management platform
One platform for more efficient production management
- Real time. Accurate data.
- Lower downtime costs.
- Higher productivity.
When production data is scattered, decisions are delayed
Separate systems and manual data collection make it hard to see the real production situation in time.
Data in different systems
Production plans, downtime, energy consumption, quality records, material movement and employee safety processes are often managed separately. This makes it hard for managers to see the overall factory situation.
Delayed reaction to deviations
When data is collected manually or analyzed only after the shift, downtime, energy spikes, defects or safety risks are addressed too late.
Missing shared context
Separate charts don't reveal the real cause. You need to see how the same work center produces, how much energy it uses, what defects it creates and whether the process runs safely.
One ecosystem for all production processes
PixinnTech is not just a collection of separate modules. The systems can use the same work centers, lines, shifts, products, employees and device data. This lets you link production efficiency, energy usage, logistics, quality deviations, equipment maintenance status and employee safety events in one context.
One platform for all manufacturing management processes
Each PixinnTech module solves a specific production challenge and shares the same work center, line and shift context.
PixOEE
PixOEE – real-time production efficiency management
Monitor OEE, production time, work center states, downtime and shift results in real time. PixOEE helps you understand where time, performance and quality are lost in production.
What you get
- OEE, Availability, Performance and Quality metrics.
- Production and downtime timeline.
- Plan vs. actual analysis.
- Shift, work center and product level reports.
- Faster reaction to performance drops.
- Production planning (MTS / MTO / ATO) and demand forecasting.
Real-time OEE, production states and downtime analysis at work center level.
PixEnergy
PixEnergy – energy and resource consumption control
Monitor electricity, water, gas, compressed air and other resource consumption by device, work center, line or production zone. PixEnergy helps you see peaks, night consumption, inefficient equipment and consumption deviations.
What you get
- Electricity, water, gas and air consumption analysis.
- Real-time charts and historical reports.
- Alerts on consumption deviations.
- Comparison of work centers and resources.
- A basis for sustainability and ESG reports.
Resource analysis by period, work centers and energy types.
PixTPM
PixTPM – equipment fault and maintenance management
Register equipment faults, track maintenance work and analyze MTTR and MTBF metrics. PixTPM helps you see which equipment fails most often, provides a basis for preventive maintenance planning and helps link unplanned downtime to specific fault history.
What you get
- Fault registration and root-cause analysis.
- MTTR and MTBF metrics by equipment and period.
- Preventive maintenance planning.
- Spare parts and repair history.
- OEE integration – faults linked to downtime.
PixTPM reports with MTTR, MTBF, fault analytics and OEE relation to equipment faults.
PixLog
PixLog – internal logistics, shipments and material movement management
Manage shipments, reservations, inspections, material movement and internal logistics processes in one place. PixLog helps reduce search time, ensure clearer delivery management and better supply production.
What you get
- Shipment and transport registration.
- Reservations and arrival / departure control.
- Visibility of material and pallet movement.
- Context of warehouse zones and production locations.
- Less manual searching and waiting in production.
Management of shipments, transport and logistics records in one system.
PixQMS
PixQMS – quality control and deviation management
Manage quality inspections, defects, SPC analysis, non-conformities and corrective actions in one place. PixQMS helps link quality problems to a specific product, work center, shift or production batch.
What you get
- Quality inspection dashboards.
- OK / NOK response analysis.
- Defect and deviation trends.
- Work center quality comparison.
- Traceability by product, shift and production location.
Analysis of quality inspections, OK / NOK results and work centers.
PixCare
PixCare – employee safety and compliance management
Centrally manage employee safety processes: incidents, risks, training, PPE, safety documents, signatures and preventive actions. PixCare helps ensure clearer responsibility control and better audit readiness.
What you get
- Registration of incidents and hazardous situations.
- Management of risks and preventive actions.
- Control of training and instructions.
- Tracking of signatures / approvals.
- Measurement alerts and safety indicators.
Control of safety events, risks, actions, training and signatures in one dashboard.
PixTVVisualization layer
PixTV – live production screens for the team
The most important production, energy, quality and safety signals can be shown directly on the shop floor. PixTV helps operators and managers see relevant information in real time – from OEE to alerts and safety reminders.
What you get
- OEE and production status on screens.
- Active work centers and line states.
- Energy consumption and quality alerts.
- Safety reminders for the shift.
- Clear information for the team without extra logins.
Shop floor screen with OEE, energy, quality and safety signals in real time.
One work center view for all processes
The same work center can be seen from different perspectives: PixOEE shows production efficiency, PixEnergy energy consumption, PixQMS quality deviations, PixLog logistics processes, PixCare safety events and risks, and PixTPM equipment faults and maintenance work. A manager sees not separate symptoms, but the overall production situation.
PixinnTech
Work center
PixOEEProduction efficiency
PixEnergyEnergy consumption
PixLogLogistics
PixQMSQuality
PixCareSafety
PixTPMMaintenance
Example
If OEE drops at a work center, the system can help check whether energy consumption increased at the same time, whether more quality deviations appeared, whether material delivery was delayed, whether an equipment fault or safety event was recorded. This shared view helps find the real root cause faster.
Clear data for every production team
Each team sees what matters most for its decisions – in the same production context.
For the production manager
See OEE, production plan execution, downtime and work center states in real time.
→For the energy manager
Monitor energy consumption, peaks, night consumption and inefficient equipment.
→For the quality manager
Analyze inspections, defects, SPC metrics and the causes of quality deviations.
→For the logistics manager
See shipments, reservations, material movement, zones and production supply issues.
→For the safety specialist
Manage incidents, risks, training, signatures, PPE and preventive actions.
→For the maintenance manager
Monitor faults, preventive maintenance, MTTR and MTBF metrics, and spare parts management.
→For the technician / mechanic
See assigned tasks, faults, repair progress, required parts and completed work history in one place.
→We connect data from devices, systems and people's actions
PixinnTech can be connected with production equipment, PLC, SCADA, ERP, warehouse, HR or other internal systems. Data can be collected automatically from sensors, devices, operator actions or imported from existing company systems.
Reliable integration
Standardized protocols and APIs to connect with PLC, SCADA, ERP and other systems.
Scale and flexibility
Deployment adapts to your factory size and business needs.
Cloud or on-premise
Flexible deployment in the cloud or on your own infrastructure.
Data value
Collected data turns into better decisions and higher performance.
Multiple organizations
Run multiple factories or organizations on one platform with separate access.
Choose what you want to see in the demo
We'll show exactly the modules most relevant to your production processes.
PixOEE demo
Production efficiency, downtime, OEE and plan vs. actual.
PixEnergy demo
Energy consumption, resource analysis, charts and alerts.
PixTPM demo
Fault registration, MTTR/MTBF analysis, preventive maintenance and spare parts management.
PixLog demo
Shipments, reservations, material movement and logistics processes.
PixQMS demo
Quality inspections, defects, OK / NOK analysis and SPC.
PixCare demo
Incidents, risks, training, signatures and preventive actions.
PixTV demo
Production screens, KPIs, alerts and shift information.
Frequently asked questions
Answers to the most common questions about the PixinnTech ecosystem.
What is PixinnTech?
PixinnTech is a manufacturing management ecosystem that connects production efficiency (PixOEE), energy usage (PixEnergy), logistics (PixLog), quality (PixQMS) and employee safety (PixCare) in one platform with a shared production context.
Which modules does PixinnTech include?
The core modules are PixOEE, PixEnergy, PixLog, PixQMS and PixCare, plus the PixTV visualization layer for shop-floor screens. Modules can be deployed separately or together.
Can I deploy just one module?
Yes. You can start with a single module, for example PixOEE, and expand later – the modules share the same work centers, lines and shifts.
Which systems does PixinnTech integrate with?
With production equipment, PLC, SCADA, ERP, warehouse and HR systems. Data is collected automatically from sensors, devices and operator actions, or imported from existing systems.
Does it run in the cloud or on-premise?
It can be deployed both in the cloud and on your own on-premise infrastructure, depending on your needs.
How do I book a demo?
Write to ricardas@pixinn.lt or call +370 694 47111 – we'll help assess which PixinnTech modules are most relevant to your production.
Want to see how this would work in your factory?
Write or call us – we'll help you assess which PixinnTech solutions are most relevant to your production processes and what data is worth starting to measure first.